STEEL COLUMN CONSTRUCTION METHOD IN WAREHOUSE DEVELOPMENT: A CASE STUDY IN CENGKARENG, WEST JAKARTA
DOI:
https://doi.org/10.56127/ijst.v3i3.2214Keywords:
Steel Column, Implementation Method, Crane, Grouting, Civil Engineering InternshipAbstract
This study discusses the implementation method of steel column construction in the warehouse in Cengkareng, West Jakarta. Steel columns are essential components in structural systems, responsible for carrying and transferring vertical and lateral loads. The construction process was carried out in several stages: preparation of shop drawings, installation of anchor bolts, erection of steel columns using a crane, vertical alignment checking with a water pass, and final stabilization through grouting. A Tadano TG-500M mobile crane with a 50-ton capacity was used to assist in lifting and installing the steel columns. Over 25 days, a total of 36 columns were successfully installed under careful coordination and field supervision. Grouting was applied to fill the gaps between the base plate and the concrete foundation, ensuring proper structural stability. This method proved to be efficient and aligned with standard construction practices. The study applied a descriptive qualitative approach through direct observation, documentation, and literature review. The results highlight the importance of systematic execution and the use of appropriate tools to ensure structural quality and safety. Moreover, this internship provided valuable hands-on experience in applying civil engineering theory to real-world construction projects
References
Akter, F., & Habib, Md. H. (2019). Steel Angles and Strips Jacketing of Existing RC Columns: A State of Art. IARJSET, 6(5), 17–22. https://doi.org/10.17148/IARJSET.2019.6504
Anand, P., Sinha, A. K., & Kumar, C. (2021a). Investigation of reinforced concrete jacketed columns under different loading conditions. International Journal of Advanced Technology and Engineering Exploration, 8(81), 957–969. https://doi.org/10.19101/IJATEE.2021.874182
Anand, P., Sinha, A. K., & Kumar, C. (2021b). Investigation of reinforced concrete jacketed columns under different loading conditions. International Journal of Advanced Technology and Engineering Exploration, 8(81), 957–969. https://doi.org/10.19101/IJATEE.2021.874182
El-Badawy Sayed, A. (2009a). Retrofitting And Strengthening Of Reinforced Concrete Columns Using Steel Jackets; Mechanical Performance And Applications. JES. Journal of Engineering Sciences, 37(3), 563–580. https://doi.org/10.21608/jesaun.2009.126485
El-Badawy Sayed, A. (2009b). RETROFITTING AND STRENGTHENING OF REINFORCED CONCRETE COLUMNS USING STEEL JACKETS; MECHANICAL PERFORMANCE AND APPLICATIONS. JES. Journal of Engineering Sciences, 37(3), 563–580. https://doi.org/10.21608/jesaun.2009.126485
Hidayati, N. (2022). Evaluasi dan Perkuatan Struktur Kolom Beton Bertulang Akibat Kebakaran. Potensi: Jurnal Sipil Politeknik, 24(1), 1–9. https://doi.org/10.35313/potensi.v24i1.3606
Mujahid, A. R. , G. A. , M. M. , M. A. S. , H. K. , A. H. A. S. G. M. (2023). Behavior of RC columns strengthened with steel jacket under static axial load. Archives of Civil Engineering. https://doi.org/10.24425/ace.2023.145273
Raza, S., Khan, M. K. I., Menegon, S. J., Tsang, H.-H., & Wilson, J. L. (2019). Strengthening and Repair of Reinforced Concrete Columns by Jacketing: State-of-the-Art Review. Sustainability, 11(11), 3208. https://doi.org/10.3390/su11113208
Zhou, C., Li, X., Wang, D., & Xia, S. (2019). Analysis of Bearing Capacity and Seismic Performance of Circular RC Columns Strengthened with Externally Wrapped Steel Plates. Advances in Civil Engineering, 2019(1). https://doi.org/10.1155/2019/2515091
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2024 Era Agita Kabdiyono, Komarudin, Caca Januar, Ade Faizal Mukti
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
