ANALISIS KESEIMBANGAN LINI PROSES PCB ASSEMBLY RADIO P155 SRS DI PT PANASONIC MANUFACTURING INDONESIA
DOI:
https://doi.org/10.56127/jts.v3i3.1895Keywords:
PCB, Line Balancing, RPW, Largest Candidate RuleAbstract
PT Panasonic Manufacturing Indonesia is one of the largest manufacturing companies producing electronic products in Indonesia, achieving significant growth and development in its production processes. Ensuring an efficient production process requires maintaining proper line balancing to achieve smooth operations. However, the radio P155 Srs production line experienced workload imbalances that led to bottlenecks and time losses. These issues arose due to factors such as insufficiently skilled workers and mismatched workloads that were not aligned with operators' abilities. Such conditions can lead to worker fatigue and reduced motivation and negatively impact work effectiveness. Research conducted using the Ranked Position Weight (RPW) method demonstrated improvements by reducing the number of workstations from 12 to 8. This optimization resulted in increased track efficiency, which improved from 65.10% and 57.43% to 83.10% and 85.94%.
References
Arwini, N. P. D. (2021). Roti, Pemilihan Bahan Dan Proses Pembuatan. Jurnal Ilmiah Vastuwidya, 4(1), 33-40.
Cahyono, A. (2021). Pengukuran Waktu Kerja Untuk Menentukan Kapasitas dan Kebutuhan Operator Bagian Final Assembly di Perusahaan Trafo PT. X. UNIVERSITAS 17 AGUSTUS 1945 SURABAYA,
Febriana, N. V., Lestari, E. R., & Anggarini, S. (2015). Analisis pengukuran waktu kerja dengan metode pengukuran kerja secara tidak langsung pada bagian pengemasan di PT Japfa Comfeed Indonesia Tbk. Industria: Jurnal Teknologi dan Manajemen Agroindustri, 4(1), 66-73.
Ginting, R., & Satrio, M. R. (2020). Penyeimbangan Lintasan Produksi Raket Nyamuk Dengan Metode Moodie Young. Paper presented at the Talenta Conference Series: Energy and Engineering (EE).
Gozali, L., Widodo, L., & Bernhard, M. (2012). Analisa keseimbangan lini pada departemen Chassis PT Toyota Motor Manufacturing Indonesia dengan algoritma ant colony, rank positional weight, dan algoritma genetika. Jurnal Teknik Industri, 2(2), 119-126.
Hariyanto, M. I. A., & Azwir, H. H. (2021). Peningkatan Effisiensi Tenaga Kerja pada Lintasan Assy Wheel dengan Metode Line Balancing Ranked Positional Weight.
Herawati, H., & Mulyani, D. (2016). Pengaruh kualitas bahan baku dan proses produksi terhadap kualitas produk pada UD. Tahu Rosydi Puspan Maron Probolinggo. UNEJ e-Proceeding, 463-482.
Pradana, A. Y., & Pulansari, F. (2021). Analisis pengukuran waktu kerja dengan stopwatch time study untuk meningkatkan target produksi di PT. XYZ. JUMINTEN, 2(1), 13-24.
Priyono, P., & Radyanto, M. R. (2023). PENINGKATAN KUALITAS PERAKITAN WIRE HARNESS TYPE XYZ MENGGUNAKAN METODE STATISTIC QUALITY CONTROL. Journal of Industrial Engineering and Operation Management (JIEOM), 6(2).
Sitanggang, F. V., & Laksono, P. W. (2022). Penerapan Line Balancing Pada PT. XYZ Dengan Metode Largest Candidate Rule Dan Ranked Positional Weight. Paper presented at the Seminar dan Konferensi Nasional IDEC.
Trisnawati, A. (2017). Analisis Keseimbangan Lini Perakitan Produksi Towing Winch Dengan Menggunakan Metode Ranked Positional Weight (RPW) Pada PT. Pindad (Persero) Bandung. STIE Ekuitas,
Wignjosoebroto, S. (2003). Pengantar teknik dan manajemen industri. Surabaya: Guna Widya, 2.
