DISAIN MODUL PRAKTIKUM SISTEM KENDALI DUA MOTOR INDUKSI DENGAN TEKNIK FUNCTION BLOCK MENGGUNAKAN PLC, MAD11 DAN VFD
DOI:
https://doi.org/10.56127/jts.v4i1.1946Keywords:
Human Machine Interface, Programmable Logic Controller, MAD11, CP2E PLC, Variable Frequency DrivesAbstract
The control and monitoring system for induction motor speed is widely used in industrial environments, specifically in the cable industry. The use of two working induction motors is for driving two extrusion machines that produce cables. Each machine operates according to a specific formula uploaded to the program. The main machine produces molten plastic in larger volumes, while the smaller machine applies coloring to the surface of the cable. However, the limited number of experts in this field often makes the industry experience difficulties when designing, modifying or when problems occur in the production machine control system program, so that foreign experts often have to be called in to handle it.
To overcome this challenge, Educational Institutions need to prepare engineering students to be equipped with automation knowledge and practical experience through practical modules that enable them to design and implement HMI and PLC. This research aims to design a learning medium for industrial automation lab practice to enhance students' skills by mastering the concept of controlling two induction motors in the cable industry, where the motor speeds follow a formula similar to a linear equation uploaded to the Programmable Logic Controller (PLC) program.
References
A. Supardi, U. Umar, I. Setiyoko, and M. Saifurrohman, “Rancang Bangun Sistem Kendali Dan Monitoring Kecepatan Motor Induksi Berbasis Programmable Logic Controller (PLC) Dilengkapi Layar Sentuh,” Emit. J. Tek. Elektro, vol. 22, no. 1, pp. 65–72, 2022, doi: 10.23917/emitor.v22i1.15784.
S. Dinata et al., “Real-time Analysis of Inverter Performance via SCADA Haiwell Online Monitoring,” J. Adv. Res. Appl. Sci. Eng. Technol., vol. 37, no. 1, pp. 99–114, 2024, doi: 10.37934/araset.37.1.99114.
Wawan Heyawan, P. Negeri Pontianak, J. Jend Ahmad Yani, B. Laut, and J. Elektro, “ELIT JOURNAL Electrotechnics And Information Technology Modul Pratikum Kendali Otomasi Industri Tingkat Lanjut Menggunakan Aplikasi IoT Dalam Monitoring Proses Kontrol,” vol. 2, no. 2, pp. 21–31, 2021.
V. Djukic, “Evolution from Modeling by Means of Function Block Diagrams to Domain-specific Modeling in Automation,” INISTA 2020 - 2020 Int. Conf. Innov. Intell. Syst. Appl. Proc., 2020, doi: 10.1109/INISTA49547.2020.9194670.
A. W. Aditya, R. M. Utomo, N. R. Alham, and H. Hilmansyah, “The Industrial IoT Control Design of Three Phase Induction Motor using Conventional V/F Method,” Elkha, vol. 15, no. 1, p. 67, 2023, doi: 10.26418/elkha.v15i1.63817.
B. L. Prasanna, G. Madhusudhanarao, S. Kaushaley, S. Nakka, and P. K. Jena, “Automatic Bottle Filling and Capping Machine using SCADA with the Internet of Things,” 2022 OPJU Int. Technol. Conf. Emerg. Technol. Sustain. Dev. OTCON 2022, pp. 1–7, 2023, doi: 10.1109/OTCON56053.2023.10114011.
H. Priyatman, S. Supriono, and A. Irwanto, “APLIKASI TEKNOLOGI IOT PADA WTP(WATER TREATMENT PLANT) SISTEM PENDINGIN AIR PADA MESIN PEMBANGKIT GUNA MENJAGA NILAI pH DAN TDS UNTUK KUALITAS AIR.,” Transmisi, vol. 24, no. 3, pp. 106–113, 2022, doi: 10.14710/transmisi.24.3.106-113.
S. Howimanporn, S. Chookaew, and C. Silawatchananai, “Comparison between PID and Sliding Mode Controllers for Rotary Inverted Pendulum Using PLC,” 2020 4th Int. Conf. Autom. Control Robot. ICACR 2020, pp. 122–126, 2020, doi: 10.1109/ICACR51161.2020.9265510.
A. Sener, D. D. Koc, K. Yilmaz, and T. Demirdelen, “Plc-Based Automation System Integration in Textile Dye Dosing Machine and Environmental System Design,” Int. J. Tech. Phys. Probl. Eng., vol. 14, no. 2, pp. 153–159, 2022.
I. Halimi, “Perancangan Sistem Monitoring Suhu dan Getaran Turbin Berbasis HMI PLC,” J. Soc. Sci. Res., vol. 3, no. 2, pp. 3452–3463, 2023, [Online]. Available: https://j-innovative.org/index.php/Innovative/article/view/701/570.
A. Kale, N. R. Kamdi, M. P. Kale, and P. A. A. Yeotikar, “a Review Paper on Variable Frequency Drive,” Int. Res. J. Eng. Technol., vol. 4, no. 1, pp. 1281–1284, 2017, [Online]. Available: https://irjet.net/archives/V4/i1/IRJET-V4I1229.pdf.
M. Thahir, M. I. Bachtiar, N. R. Najib, and ..., “Modul Pembelajaran Sistem Otomasi Berbasis Teknologi Industri 4.0,” Semin. Nas. Has. …, pp. 69–73, 2022, [Online]. Available: http://jurnal.poliupg.ac.id/index.php/snp2m/article/download/3860/3271.
H. Ashshidiqi, T. Tohir, B. Setiadi, and S. Sudrajat, “Akuisisi data kecepatan motor pneumatic vane dengan protokol Modbus RTU berbasis PLC,” JITEL (Jurnal Ilm. Telekomun. Elektron. dan List. Tenaga), vol. 4, no. 1, pp. 57–64, 2024, doi: 10.35313/jitel.v4.i1.2024.57-64.
