ANALISA PEMBUATAN DAN KEKUATAN TARIK RENG BAJA TS 150 – R40.45 KASO METAL DI PT. TATALOGAM LESTARI

Authors

  • Ahcmad Fauzan Universitas Bhayangkara Jakarta Raya

DOI:

https://doi.org/10.56127/juit.v2i2.697

Keywords:

manufacturing process, metal rafter battens

Abstract

In the process of making light steel lath type TS 150 – R40.45 metal rafters at PT. tatalogam lestari is done through a rolling process that goes through several processes. Starting from the provision of raw materials (coil), uncoiler process, roll forming process, roll stamp painting process, cutting process, quality control. All of these processes are interconnected to support production which in the end creates products according to standards and specifications. The steps in making battens include several processes, namely uncoiler to unroll the coil then with roll forming in the roll forming process to involve continuous folding of long strips of sheet metal into battens, then roll stamp, cutting process to get clearance and style. cut on the cutting machine, that is, clearance = 0.027 mm and cutting force = 69300 KN. finishing process, this process is carried out by checking (quality control), checking batten products whether there are defects in dimensions, defects in brand labels, physical material defects. Then the batten product will go to the repair division to be repaired and the product is ready to be packed.

References

Anonim, 2010, Roll Forming Real Stell Strip, Rev 3, Blues Scope Steel, Melbourne.

Groover, Mikell P, 2010, Fundamental, of Modern Manufacturing: Materials, Proceses and System, Fouth Edition, John Wiley & Sons, INC.

Kalpakjian, Serope and Steven R, Schmid, 2008, The Structure of Metals, Manufacturing Processes for Engineering Materials, 5th, Pearson Education.

Saleh Nur, kasimat dan Arfan Utirahman, 2012, Analisa Elemen Baja Ringan Sebagian Bahan Alternatif Pengganti Baja Konvensional Pada Rangka Batang, Laporan Penelitian, Universitas Negeri Gorontalo, Gorontalo.

http://www.cherngji.com.tw/roll-forming-machine/roll-forming-machine- product-16.html, Diunduh Tanggal : 15 Maret 2016.

http://www.cherngji.com.tw/roll-forming-machine/roll-forming-machine- product-02.html, Diunduh Tanggal : 15 Maret 2016.

Published

2023-05-30

How to Cite

Ahcmad Fauzan. (2023). ANALISA PEMBUATAN DAN KEKUATAN TARIK RENG BAJA TS 150 – R40.45 KASO METAL DI PT. TATALOGAM LESTARI. Jurnal Ilmiah Teknik, 2(2), 27–36. https://doi.org/10.56127/juit.v2i2.697

Similar Articles

1 2 3 4 5 > >> 

You may also start an advanced similarity search for this article.

Most read articles by the same author(s)

Obs.: This plugin requires at least one statistics/report plugin to be enabled. If your statistics plugins provide more than one metric then please also select a main metric on the admin's site settings page and/or on the journal manager's settings pages.