HUBUNGAN PENGETAHUAN, PENERAPAN SOP DAN PEMASANGAN SAFETY SIGN DENGAN KEJADIAN KECELAKAAN KERJA DI PROYEK APARTEMEN MAHATA MARGONDA
DOI:
https://doi.org/10.56127/jukeke.v2i2.736Keywords:
Work Accident, Knowledge, Application of SOP, Safety SignAbstract
The occurrence of work accidents is due to two main factors, namely environmental and mechanical factors or unsafe conditions and the second factor, namely human factors or unsafe actions. The purpose of this study was to determine the relationship between knowledge, SOP implementation and installation of safety signs with work accidents in the Mahata Margonda apartment project. This research method uses a quantitative method, based on its type using a cross sectional approach with a population of general workers in the construction of the Mahata Margonda apartment project. The results of this study show that from 70 respondents there were 27 (38.6%) general construction workers known to have had work accidents, 35 (50%) workers who had low knowledge, 40 (57.1%) workers with the implementation of SOPs that did not appropriate, 37 (52.9%) according to general workers the installation of safety signs is not appropriate. Based on the results of the chi square statistical test on the knowledge variable, the p-value was 0.001<(0.05), the application of SOP was obtained with a p-value of 0.023<(0.05), the safety sign installation was obtained with a p-value of 0.020<(0.05) which shows the results of a relationship between each variable and the incidence of work accidents. In conclusion, there are general workers who have experienced work accidents, general workers with low knowledge, inappropriate implementation of SOPs and inappropriate safety signs. There is a significant relationship between knowledge, application of SOP and installation of safety signs with the incidence of work accidents in the Mahata Margonda apartment project
References
Markkanen P. Keselamatan dan Kesehatan Kerja di Indonesia. Ilo. 2004;1–53
Susanto S, Karisma DA, Budi KC. Faktor yang Berhubungan dengan Pengetahuan Penerapan Keselamatan Kerja pada Pekerja Konstruksi. J Civilla [Internet]. 2020;5(2):476–85. Available from: http://www.jurnalteknik.unisla.ac.id/index.php/CVL/article/view/494
PT DI, Tbk STI, Kabupaten C. Dengan Kejadian Kecelakaan Kerja Karyawan. 2018;7(2).
Prihatiningsih S, Suwandi T. Penerapan Metode HIRADC Sebagai Upaya Pencegahan Kecelakaan Kerja Pada Pekerja Mesin Rewinder. Indones J Occup Saf , Heal Environ [Internet]. 2014;1(1):73–84. Available from: http://journal.unair.ac.id/download-fullpapers-kklk22cc9d96e72full.pdf
Putri FA, Suroto, Wahyuni I. Hubungan Antara Pengetahuan, Praktik Penerapan SOP, Praktik Penggunaan APD Dan Komitmen Pekerja dengan Risiko Kecelakaan Kerja Di PT X Tangerang. J Kesehat Masy. 2017;5(3):269–77
Hidayatul. Designing Safety Sign Using Ansi Z535 Standard for Control of Occupational Health and Safety (K3) Risk in Galvanized Production Department Pt. Kunango Jantan. 2021;8(5):8059.
Eka Saputra Wijaya Karya FP, DI Panjaitan Kav TJ. Analisis Kesesuaian Penerapan Safety Sign Di Pt. Terminal Petikemas Surabaya. 2016.
Jaelani A. Hubungan Pengetahuan Keselamatan Kerja Dengan Kewaspadaan Terhadap Kecelakaan Kerja Pada Karyawan Bagian Pengisian Lpg Pt Pertamina (Persero) Fuel Retail Marketing Region Vii Sulawesi. Skripsi. 2011;109
Muflihah Darwis A, Wira Lisrianti Latief A, Ramadhani M, Nirwana A, Kesehatan dan Keselamatan Kerja B, Kesehatan Masyarakat Universitas Hasanuddin F, et al. Kejadian Kecelakaan Kerja Di Industri Percetakan Kota Makassar Events Of Work Accidents In The Printing Industry Makassar City. JKMM. 2020;3(2).
Osmar Dangga P, Munasih I, Ayu Ratnawinda L. Kajian Faktor-Faktor Penyebab Kecelakaan Konstruksi. Vol. 2, Student Journal Gelagar. 2020
