STRUCTURE ANALYZE BUSHING OF CONTAINMENT RING USING NON-DESTRUCTIVE TEST FOR TURBOFAN OF AIR PLANES ENGINES
DOI:
https://doi.org/10.56127/ijst.v2i2.773Keywords:
Containment Ring, Bushing, Non-Destructive.Abstract
Containment ring is component on engine for turbofan engines of air plane. The function of Containment ring is for balancing assembly part as the shaft, retaining disk and fully bladed disk on turbofan of airplanes. The component of containment ring is bushing for join of part on engine. The joint process of production on bushing and ring using welding process. This study will discuss of structure analyze of welding area on containment ring using Non-Destructive Test (NDT). Method of analyze is additional chemical on welding area using ADROX for focusing crack are in material after welding process. The material of ring and busing is stainless steel FYNIS SUS304. The result show that welding areas of joint no any crack finding after 10 specimens tested of Containment ring. The checking method using additional chemical ARDROX 9814 (penetrant) in welding areas for inside and outside areas of the part.
References
Bai Conger, Xuan Haijun, Huang Xiannin “Containment ability and groove depth design of U type protection ring”, International Research Chinese Journal of Aeronautics, Vol. 29, 2 April Page 395-402, 2016
T. B. Dewhurst, “The Impact Load on Containment Rings During a Multiple Blade Shed in Aircraft Gas Turbine Engines”, International Journals manufacturing, Material and Metalurgy, Vol. 9, 10 March Page 01-07, 2015.
Goran Vukelic, Josip Brnic, “Predicted Fracturer Behavior of Shaft Steels with Improved Corrosion Resistance”, International Journal MDPI Switzerland, Vol 1, 11 August, Page 1-9, 2016.
Richard W.H, Emmett A. Witmer, “Approximate analysis of containment/deflection ring responses to
engine rotor fragment impact” International Journal Air Craft, Vol. 0110, 15 Jan. Page 10-20, 2019.
Lee Y. G, Grimes D.A” Study of the Effect of Spark Plug Electrode Design on 4 Cycle”, Journal of SAE Technical, Vol 02, 22 Feb. Page 479-489, 2018
Lucas W.S Crispim,” Modeling Spark Plug discharge in dry air, Journal international Technology. Vol. 12, 16 Dec, Page 2399-2506, 2020.
Armando Ortiz, Jorge L, Romero “Spark Plug Failure due to a combination of strong magnetic fields and undesirable fuel additives. Journal Engineering Analysis Vol. 15, 17 Jun. Page 67-71, 2013.
