Analisis Statis Spacer Adaptor pada Kendaraan Berdisain Khusus M-V3 Seri Komersial
DOI:
https://doi.org/10.56127/jts.v4i2.2173Keywords:
Stress Analysis, Spacer Adaptor, SolidWorks, Factor of Safety, Maung MV3 VehicleAbstract
Spacer Adaptor is an essential component in vehicle suspension systems, functioning to create space between two mechanical elements to ensure stable and precise connections. This study aims to analyze the structural strength of the Spacer Adaptor on M-V3 vehicle manufactured, using static analysis with SolidWorks software. The simulation was conducted to evaluate the maximum stress and the Factor of Safety (FOS) of the 20 mm design. The results show that the maximum stress is 51.171 N/m², with a FOS value of 13.2. These results indicate that the component has a high safety margin against potential failure due to loading. Therefore, the Spacer Adaptor design is considered highly safe and reliable for tactical vehicle applications.
References
Applicad. (2014) Mengenal Solidworks. Http://Applicadindonesia.com
Balaguru, S., Elango Natarajan, S. Ramesh, and B. Muthuvijayan. (2019). “Analisis Struktural Dan Modal Rangka Skuter Untuk Desain Peningkatan.” 16:1106– 16.
Diharjo, K, dan Triyono, T, 2003, Buku Pegangan Kuliah Material Teknik, Universitas Sebelas Maret, Surakarta.
Spacer Adaptor Front Suspension
Fauzi, Z. (2015) Tutorial Solidworks : Stress Analysis Pada Rangka Meja. Yogyakarta: Universitas Islam Indonesia.
Ginting, R. (2010) Perancangan Produk. Yogyakarta: Graha Ilmu.
Jamaludin. 2019. “Perencanaan Pembebanan Statis Rangka Sepeda Listrik Menggunakan Software Solid Work 2016.” Journal of Chemical Information and Modeling 53(9):1689–99.
Mott, R. (2004). Elemen-Elemen Mesin dalam Perancangan Mekanis (D. Prabantini (ed.); 2nd ed.). ANDI Yogyakarta.
SolidWorks. (2015). INTRODUCING SOLIDWORKS Contents. Dassault Systèmes SolidWorks
Sularso, & Suga, K. (2004). Dasar Perencanaan dan Pemilihan Elemen Mesin (11th ed.). PT. Pradnya Paramita.
