ANALISA DARI PERANCANGAN CAR LIFT SISTEM HIDROLIK MENGGUNAKAN SOFTWARE SOLIDWORKS 2021
DOI:
https://doi.org/10.56127/juit.v3i2.1555Keywords:
Car Lift, Hydraulic System, Simulation, SolidworksAbstract
Car Lift hydraulic system is a form of change or transfer of power by using a conducting medium in the form of liquid fluid to obtain more power than the initial power released. The purpose of this writing is to find out the Car Lift design process for vehicles, as well as the Car lift design testing process using software solidworks 2021. Observation method, literature study method, and simulation method are the references in this writing. Based on the results of the simulations carried out, the smallest von misses value is 6,017 N/mm2 and the largest is 60,174 N/mm2, then for the displacement value obtained the smallest is 0.046 mm and the largest is 0.456 mm, then for the strain value with the pressure value obtained the smallest is 0.00002 and the largest is 0.00019, and the Factor Of Safety value in the design with material (ASTM A36) results in a safety factor of 4.2, the Car Lift design offers a level of reliability that meets recognized industry standards.
References
Indrabayu, N. (2021). Rancang Bangun Troli Penopangportabel Sistem Hidrolik (Proses Perawatan) (Doctoral dissertation, Politeknik Negeri Sriwijaya).
Suzuki. Dongkrak Mobil: Fungsi, Jenis dan Cara Menggunakannya. Di akses pada 10 Agustus 2023. From https://www.suzuki.co.id/tips-trik/dongkrak-mobil-fungsi-jenis-dan-cara-menggunakannya.
Faizal, M., & Umam, S. (2018). Analisis Kekuatan Dan Kualitas Sambungan Las Dengan Variasi Pendinginan Oli Dan Udara Pada Material Astm a36 Dengan Pengujian Ndt (Non Destructive Test). Institut Sains dan Teknologi Nasional.
Zhang, Q. (2009). Basics of Hydraulic Systems. CRC Press.
Meladiyani, E., Permana, B., Marsudi, M., & Zayadi, A. (2019). Perancangan Alat Pengangkat Sistem Hidrolik Tipe H Pada Tempat Pencucian MobilDengan Kapasitas Maximum 2.5 Ton. Jurnal Ilmiah Giga, 21(1), 33-43.
Purwantono, P., & Abadi, Z. (2019). Dasar-Dasar Sistem Hidrolik.
Gunawan, Y., Endriatno, N., & Anggara, B. H. (2017). Analisa pengaruh pengelasan listrik terhadap sifat mekanik baja karbon rendah dan baja karbon tinggi. Jurnal Ilmiah Mahasiswa Teknik Mesin. Universitas Halu Oleo. Kendari, 2(1).
Sampoerna Academy. (n.d.). Pengertian hidrolik. Retrieved July 17, 2023, from https://www.sampoernaacademy.sch.id/id/pengertian-hidrolik/
Rusdianto, F. (2017). Dasar Hidrolik dan Pneumatik.
