Design of a Rotary Blood Mixer Based on Arduino Uno to Prevent Blood Clotting

Authors

  • Roy Rizki Maulana Sekolah Tinggi Ilmu Kesehatan, Indonesia
  • Bayu Wahyudi Sekolah Tinggi Ilmu Kesehatan Semarang, Indonesia
  • Florentinus Budi Setiawan Sekolah Tinggi Ilmu Kesehatan Semarang, Indonesia

DOI:

https://doi.org/10.56127/juit.v4i2.2003

Keywords:

Blood homogenization. Rotary Blood Mixer, Arduino Uno Microcontroller, Optocoupler Sensor, DC Motor

Abstract

One of the examinations in the laboratory related to blood is a hematology examination. In a hematology examination, the patient's blood is first taken before being examined or processed by a Hematology Analyzer. The blood that will be processed for examination will clot quickly. This tool uses an input voltage from PLN 220 V which is then converted by using a power supply to DC current using a power supply and to reduce the voltage to supply the microcontroller. Arduino Uno as a microcontroller which contains a program sends commands to the optocoupler sensor to regulate the rpm speed of the dc motor.

References

Annanisa, F. (2015). Basics of Hematology. Jakarta: Pustaka Medika.

Apriyulida, F. (2017). The Effect of Timer Modifications on Roller Mixer Control. Journal of Pearl Electromedicine, 9(2), 45–52. https://doi.org/10.51544/elektromedik.v1i1.2318

Faidatunnadia, E. (2024). Design an Arduino-based rotary blood mixer (Final project, Widya Husada University Semarang). Widya Husada University Semarang.

Kusuma, H. (2018). Rancang Bangun Alat Pencampur Sampel Otomatis Menggunakan Sensor dan Mikrokontroler (Skripsi, Politeknik Negeri Bandung).

Nugraha, R. (2010). Manual Book Roller Mixer. Bandung: Medical Diagnostic Laboratory.

Putri, R. D. (2016). Introduction to Clinical Laboratory Technology. Surabaya: Airlangga University Press.

Rahmah, A. (2022). Effectiveness of Modified Roller Mixer for Homogenizing Blood Samples. Jurnal Elektromedik Indonesia, 12(1), 18–25. https://doi.org/10.5678/elektromedik.v12i1.4567

Sparkfun Electronics. (2020). Getting Started with Arduino and Motors. Sparkfun Learning Portal. https://learn.sparkfun.com/tutorials/ [accessed May 4, 2025].

Team wikiHow. (2017, October 12). How to calculate percentage error. WikiHow. https://www.wikihow.com/Calculate-Percentage-Error [accessed May 4, 2025].

Wijayanti, M., Fitriyani, Y., Nugraha, A. H., Handayani, I. T., & Muchlis, A. (2023). PROTOTYPE SORTASI BENDA BERDASARKAN WARNA BERBASIS ARDUINO. Jurnal Ilmiah Flash, 8(2), 89-92.

Wijaya, A., & Lestari, N. (2019). Pengembangan Sistem Otomatisasi pada Alat Laboratorium Berbasis Arduino. Jurnal Teknologi Kesehatan, 5(1), 32–40. https://doi.org/10.1234/jurnalkes.v5i1.1021

Downloads

Published

2025-05-16

How to Cite

Roy Rizki Maulana, Bayu Wahyudi, & Florentinus Budi Setiawan. (2025). Design of a Rotary Blood Mixer Based on Arduino Uno to Prevent Blood Clotting. Jurnal Ilmiah Teknik, 4(2), 25–35. https://doi.org/10.56127/juit.v4i2.2003

Issue

Vol. 4 No. 2 (2025): Mei: Jurnal Ilmiah Teknik

Section

Articles

Citation Check

Similar Articles

1 2 > >> 

You may also start an advanced similarity search for this article.