Machine Failure Risk Management in Continuous Production Systems through Failure Mode Identification and Risk Priority Number Evaluation
DOI:
https://doi.org/10.56127/juit.v5i2.2804Keywords:
Machine Failure Risk Management, Failure Mode and Effects Analysis, Risk Priority Number, Predictive Maintenance, Continuous Production SystemsAbstract
Abstract: Machine failure risk management is essential in continuous production systems because unplanned downtime can disrupt production flow, reduce product quality, increase maintenance costs, and create safety risks. Objective: This study aims to develop a machine failure risk management framework through Failure Mode and Effects Analysis (FMEA) and Risk Priority Number (RPN) evaluation. Methodology: This research uses a qualitative literature study approach. Data were collected from scientific journals, technical standards, and academic publications related to reliability engineering, risk management, predictive maintenance, and production systems. The data were analyzed thematically to identify failure modes, risk assessment parameters, and effective control strategies. Findings: The findings show that machine failure risks can be managed through systematic identification of failure modes, evaluation of occurrence, severity, and detection, and prioritization based on RPN values. High-risk failure modes require preventive maintenance, predictive monitoring, redundancy systems, spare parts planning, and structured operator involvement. Implications: The proposed framework can assist manufacturing organizations in developing documented, auditable, and proactive maintenance risk management systems to improve machine reliability and reduce unplanned downtime. Originality: The originality of this study lies in integrating FMEA, RPN evaluation, predictive maintenance, spare parts management, operator participation, and ERP-based monitoring into a comprehensive framework for continuous production systems.
References
Adler, E. S., & Clark, R. (2011). An invitation to social research: How it's done. Cengage.
Anwar, M. S., Setiawan, A., Saleh, M., Diba, F. F., Triono, B., & Darmawan, D. (2022). Fabric Expansion Joint Roller Machine Manufacturing Planning. International Journal of Service Science, Management, Engineering, and Technology, 1(1), 1-5.
Arifin, S., & Sinambela, E. A. (2021). Studi tentang kinerja karyawan ditinjau dari keberadaan sistem informasi akuntansi dan pengendalian internal. Realible Accounting Journal, 1(1), 58-70.
Ayele, Y. Z., & Barabadi, A. (2017). Quantitative risk analysis of components under high stress.
Bao, H., & Zuo, H. (2018). Probability risk analysis and control of aeroengine control system failures. 189(6), 062049. https://doi.org/10.1088/1755-1315/189/6/062049
Berrade, M. D., Calvo, E., & Badía, F. G. (2023). Maintenance of systems with critical components. Prevention of early failures and wear-out. Computers & Industrial Engineering, 181, 109291. https://doi.org/10.1016/j.cie.2023.109291
Chi, G., Tang, X., Zhang, L., & Hu, J. (2025). Calculation of ground backup requirements for aero-engine based on statistical analysis.
da Silva, B. D. S., Darmawan, D., & Gardi, B. (2022). A Systematic Approach to Risk Management to Enhance Information Technology Project Success in a Dynamic Business Environment. Journal of Social Science Studies, 2(2), 213-218.
Darmawan, D. (2026). Human Resource Risk Management and HR Governance as Predictors of Organizational Justice in Islamic Banking Institutions. Jurnal Ilmiah Satyagraha, 9(1), 66-80.
Djaelani, M., & Darmawan, D. (2016). Studi Tentang Program Keselamatan dan Kesehatan Kerja (K3) serta Kompetensi Lintas Budaya terhadap Kinerja Pekerja Konstruksi. Jurnal Ekonomi dan Bisnis, 6(2), 11-17.
Djaelani, M., Judiono, J., Darmawan, D., & Amri, M. W. (2022). Study of concrete: quality and economic. Bulletin of Science, Technology and Society, 1(1), 1-3.
Djaelani, M., Sinambela, E. A., Darmawan, D., & Mardikaningsih, R. (2021). Strengthening the culture of occupational safety and health as a contributor to the formation of construction project performance. Journal of Marketing and Business Research (MARK), 1(2), 59-70.
Dreyer, S., Passlick, J., Olivotti, D., Lebek, B., & Breitner, M. H. (2018). Optimizing Machine Spare Parts Inventory Using Condition Monitoring Data. In A Quarterly Journal of Operations Research (pp. 459-465). https://doi.org/10.1007/978-3-319-55702-1_61
Fajarudin, M., Negara, D. S., & Putra, A. R. (2024). Internal Audit Obligations and Corporate Legal Liability for Corruption. Journal of Social Science Studies, 4(1), 303-312.
Gardi, B., & Sinambela, E. A. (2022). Effectiveness of Internal Controls and Compliance with Accounting Rules and its Influence on the Trend of Accounting Fraud. Studi Ilmu Sosial Indonesia, 2(1), 1-12.
Handani, D. W., & Uchida, M. (2024). Development of Maintenance Scheduling Model for the Safety Operational of Ship Machinery. Kapal, 21(2), 92-101. https://doi.org/10.14710/kapal.v21i2.61582
Hansen, H. K., Külahçı, M., & Nielsen, B. F. (2024). A primer on predictive maintenance: Potential benefits and practical challenges. Quality Engineering, 1-12. https://doi.org/10.1080/08982112.2024.2331140
Hariani, M., & Sinambela, E. A. (2021). Hubungan Kualitas Kehidupan Kerja, Kepuasan Kerja, dan Integritas Akuntan Publik. Ekonomi, Keuangan, Investasi dan Syariah (Ekuitas), 3(2), 297-301.
Kim, D. H., Park, H. J., & Yang, S. W. (2025). Analysis of the cause of damage in Aircraft Engine through the Fracture Analysis. Journal of the Korea Academia Industrial Cooperation Society. https://doi.org/10.5762/kais.2025.26.11.107
Kumar, M. P., Raju, N. V. S., & Kumar, M. (2024). Prioritizing the risk priority numbers in fmeca – a heuristic approach. In (pp. 191-201). https://doi.org/10.58532/v3bdme5p2ch7
Lampard, R., & Pole, C. (2015). Practical social investigation: Qualitative and quantitative methods in social research. Routledge.
Liu, Y., Chen, B. Q., Dong, Q., Liu, W., Nie, W., & Yang, C. (2022). Failure mode risk assessment methodology for controlling multi-uncertainties in the evaluation process. Engineering Applications of Artificial Intelligence, 116, 105470. https://doi.org/10.1016/j.engappai.2022.105470
Magomedov, F. M., Melikov, I. M., Pashtaev, B. D., Bedoeva, S. V., & Kurbakov, I. I. (2022). Methods for determining the probability of failure-free operation of the engine of machines with an electronic control system. IOP Conference Series: Earth and Environmental Science, 979(1), 012103. https://doi.org/10.1088/1755-1315/979/1/012103
Mardikaningsih, R., & Darmawan, D. (2025). Analisis Adopsi Teknologi Internet of Things Oleh Industri Manufaktur Skala Kecil dan Menengah. Jurnal Lima Daun Ilmu, 5(1), 41.
Mardikaningsih, R., Halizah, S. N., Nuraini, R., Darmawan, D., & Hardyansah, R. (2024). Manajemen Risiko Pada Penerapan Manajemen Rantai Pasokan Global: Kajian Terhadap Pendekatan Strategis Untuk Mengidentifikasi, Mengevaluasi, dan Mengelola Risiko. Yos Soedarso Economic Journal (YEJ), 6(2), 1-15.
Nozari, H., & Szmelter-Jarosz, A. (2025). A Predictive Maintenance Approach for Composting Plants Based on ERP and Digital Twin Integration. Machines. https://doi.org/10.3390/machines13121123
Okirie, A. J., & Ejomarie, E. K. (2025). Exploring Proactive Maintenance through Fault Detection Techniques for Rotating Machinery. International Journal of Prognostics and Health Management, 16(2). https://doi.org/10.36001/ijphm.2025.v16i2.4424
Priambodo, S., Djaelani, M., Jahroni, J., Sinambela, E. A., & Darmawan, D. (2022). Evaluation of the Need for Motorcycle and Car Parking Spaces. International Journal of Service Science, Management, Engineering, and Technology, 1(1), 16-19.
Putra, A. R., & Arifin, S. (2023). Ethical Principles in Corporate Financial Management: A Literature Study on Investment and Risk. Journal of Social Science Studies, 3(2), 221-226.
Riyadin, F., & Darmawan, D. (2023). Experimental Study of 3 KW Generator Damage Types Based on Vibration Signals. International Journal of Service Science, Management, Engineering, and Technology, 3(2), 27-31.
Santos, G. R. D., & Silva, T. K. L. R. D. (2024). Optimization of preventive maintenance in production lines: an approach based on reliability statistics. Contribuciones a Las Ciencias Sociales. https://doi.org/10.55905/revconv.17n.2-129
Selvik, J. T., & Ford, E. P. (2017). Down Time Terms and Information Used for Assessment of Equipment Reliability and Maintenance Performance. In. https://doi.org/10.5772/INTECHOPEN.71503
Shipman, M. D. (2014). The limitations of social research. Routledge.
Signoret, J. P., & Leroy, A. (2021). Failure Mode, Effects (and Criticality) Analysis, FME(C)A. In (pp. 165-172). https://doi.org/10.1007/978-3-030-64708-7_10
Sinambela, E. A., & Darmawan, D. (2011). Analisis Dampak Penerapan Sistem Informasi Akuntansi terhadap Kualitas Laporan Keuangan melalui Sistem Pengendalian Internal Sebagai Variabel Intervening. Jurnal Ekonomi dan Bisnis, 1(1), 18-29.
Sinambela, E. A., Darmawan, D., & Gardi, B. (2022). Production cost calculation analysis using variable costing method. International Journal of Service Science, Management, Engineering, and Technology, 1(2), 13-16.
Sinambela, E. A., Darmawan, D., Gardi, B., & Malaihollo, F. J. (2022). Cost control through break even point analysis. International Journal of Service Science, Management, Engineering, and Technology, 1(3), 1-3.
Sinambela, E. A., & Djaelani, M. (2022). Cost behavior analysis and categorization. Journal of Social Science Studies, 2(1), 13-16.
Sinambela, E. A., & Mardikaningsih, R. (2021). Integritas Auditor dan Peranannya terhadap Pembentukan Komitmen Organisasi. Jurnal Simki Economic, 4(2), 112-120.
Sinambela, E. A., & Mardikaningsih, R. (2022). The Influence of Accounting Information Systems, Work Motivation and Utilization of Information Technology on Employee Performance. Journal of Science, Technology and Society (SICO), 3(2), 35-44.
Sridhar, M. S. (2020). Importance and Issues of Literature Review in Research. In.
Tang, Y., Fei, Z., Huang, L., Zhang, W., Zhao, B., Guan, H., & Huang, Y. (2025). Failure Mode and Effects Analysis Method on the Air System of an Aircraft Turbofan Engine in Multi-Criteria Open Group Decision-Making Environment. Cybernetics and Systems. https://doi.org/10.1080/01969722.2025.2468189
Theodara, N. A., Darmawan, D., & Putra, A. R. (2022). Material Management Effectiveness. Bulletin of Science, Technology and Society, 1(1), 7-10.
Tranter, J. (2016). Condition monitoring is not enough. Asset Management & Maintenance Journal, 29(2), 4.
Triono, B., & Darmawan, D. (2024). 3D Printing Technology as A Driver of Innovation and Efficiency in Mechanical Engineering. Journal of Science, Technology and Society (SICO), 5(2), 11-20.
Triono, B., Darmawan, D., Djaelani, M., Safitri, F. S. A., & Masithoh, N. (2025). How Digitalization Reshapes Labor and Task Architecture in the Manufacturing Sector. International Journal of Service Science, Management, Engineering, and Technology, 7(2), 11-16.
Wu, Y., Zhang, H., Li, D., & Lv, Z. (2026). Causal approach to quality-centered risk assessment in multi-machine manufacturing systems. Reliability Engineering & System Safety, 267, 111952. https://doi.org/10.1016/j.ress.2025.111952
Zhu, R., & Newman, G. (2025). Synthesizing Insights. In (pp. 266-273). https://doi.org/10.4324/9781003628064-20
Downloads
Published
How to Cite
Issue
Section
Citation Check
License
Copyright (c) 2026 Didit Darmawan, Dicky Setio Nugroho, Achmad Amirul Mufid, Muhammad Firdaus Hawari, Muhammad Hilal
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
