PROSES RANCANGAN RANGKA OVEN BATU BARA PADA PT. X
DOI:
https://doi.org/10.56127/juit.v2i2.788Keywords:
Process, Manufacture, Oven, CoalAbstract
A coal oven is one of the important laboratory tools which has the following functions: To heat or dry laboratory equipment or other objects. In the process of making this oven, several processes are carried out using conventional machines. In the manufacturing process, various things such as: material selection, frame making, body installation, installation of heaters, panels and motors, finishing etc. The manufacturing process is a process of treating parts (components) using machines where objects are formed by removing or removing some of the material from the workpiece with the aim of obtaining workpieces (components) with good accuracy and high precision so as to produce quality and quality products. high according to the wishes and product standards. Before entering into the manufacturing process, the oven is still not shaped like anything.
References
Manual Book Proses Produksi Oven, PT. Interlab Sentra Analitika.
Manual Book Dasar Kontruksi Oven, PT. Interlab Sentra Analitika.
Harsono Wiryosumarto, 2000, Teknologi pengelasan logam, Pradnya Paramita, Jakarta
Modul Mesin Las Listrik, Lab. Teknik Mesin Dasar Universitas Gunadarma
Suryady, S., & Nugroho, E. A. (2022). Simulasi Faktor Keamanan Dan Pembebanan Statik Rangka Pada Turbin Angin Savonius. Jurnal Ilmiah Multidisiplin, 1(02), 42-48.
Suryady, S., & Zhafran, R. (2022). Analisa Desain Bodi Kendaraan Tipe Urban Concept Pada Pengaruh Koefisien Drag Dan Koefisien Lift. Presisi, 24(1), 74-84.
Sari, S. P., & Suryady, S. (2018). Koefisien Perpindahan Panas Konveksi dan Simulasi Distribusi Temperatur Aliran Fluida pada Penukar Kalor Pipa Ganda dengan Pipa Spiral.
Suryady, S., & Sari, R. S. P. (2022). ANALYSIS OF TILT ANGLE AND BATTERY CHARGING TIME OF ELECTRICAL POWER REQUIREMENTS FOR WOOD CUTTING EQUIPMENT PURPOSES. International Journal Science and Technology, 1(2), 38-44.
