Execution Method of Column Casting at Stan Bintaro Sector 5 Campus Dormitory
DOI:
https://doi.org/10.56127/ijst.v4i1.2234Keywords:
Columns, implementation method, quality.Abstract
The method of implementation of column construction work is an important part in supporting the success of the building structure in the STAN Bintaro Sector 5 Campus Dormitory construction project. The column functions as the main vertical element that transmits loads from the upper structure to the foundation, so it requires proper planning and implementation, efficient, and according to technical standards. This practical work discusses the steps of implementing column work, starting from the preparation of tools and materials, formwork work, assembly and installation of reinforcement, concrete casting, to the curing process. In addition, it also discusses aspects of work safety, quality control, and obstacles that may occur in the field. With the application of structured work methods and strict supervision, it is expected that the quality of K1 column construction can meet the standards of strength, durability, and durability required in this dormitory construction project.
References
Kukuh Lukiyanto. Foreman, A Traditional Javanese Leadership Model in Modern Era Construction Projects. Edited by Maranatha Wijayaningtiyas. Jakarta, 2016.
Muhammad Ridwan Prayoga, Adhi Purnomo, et al. "Analysis and Optimization of Concrete Structure Casting Time Management in Construction Projects: Case Study of Delay in Casting Columns, Beams, and Plates." Tambusai Education 8 (2024): 350-58.
Prayoga, Muhammad Ridwan, Adhi Pmomo, and Arief Saefudin. "Analysis and Optimization of Concrete Structure Casting Time Management in Construction Projects: Case Study of Delay in Casting Columns, Beams, and Plates." Tambusai Journal of Education 8 (2024): 350-58.
Rantung, Audy H P, Bonny F Sompie, and Robert J M Mandagi. "Analysis of Cost and Schedule Control at the Construction Implementation Stage with 'Earned Value Analysis'." Scientific Journal of Media Engineering, Civil Engineering, Sam Ratulangi University Manado 4, no. 3 (2014): 190-203. http://ejournal.unsrat.ac.id/index.php/jime/article/view/6396/5912.
Arais Sastra (2019) Method of Implementation of Column Work and Calculation of Concrete Volume of Semi Basement Floor Column As 31B (Gunadarma University).
Deva Agung Putra Pratama (2022) Review of the Method of Implementation of Beam, Column and Floor Plate Structures in the Indigenous Village Assembly (MDA) Building in Klungkung Regency (Politeknik Negeri Bali).
Mohammad Khoirun Nasikhin, Arik Triarso (2023) Implementation Method of Column Structure Work in the Passenger Terminal Building Construction Project of Dhoho Kediri International Airport (Surabaya State University).
Nida Nahdia Vilanti (2018) Implementation Method of Column Work Using Sateco Formwork and Analysis of Sateco Formwork Productivity at the Patra Jasa Cirebon Hotel Project (UGM).
Navy, Edward G, 1990, Reinforced Concrete A Basic Approach, PT Eresco, Bandung. Pamungkas, A. F. S., & Yasin, N. (2020). Method of Implementation, Column Work and Calculation
Column Casting Volume in Wijayakusma Independent Tower Project.
SKSNI T-15-1991-03 Procedure for Calculation of Concrete Structures for Building.
Sudarmoko, 1996. Design Diagram of Reinforced Concrete Columns, Department of Civil Engineering, Faculty of Engineering, Gadjah Mada University, Yogyakarta.
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2025 Rifaldi Adi Saputra, Agung Sakti Meldian, Redo Sugiarto, Ira Damayanti
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
