Mitigating Occupational Hazards in Renewable Energy Manufacturing: A HIRARC Assessment of Enamelling Operations

Authors

  • Stephanus Benedictus Bera Liwun Universitas Gunadarma, Indonesia
  • Reyhan Hidayat Universitas Gunadarma, Indonesia

DOI:

https://doi.org/10.56127/juit.v4i2.2029

Keywords:

Hazard, HIRARC , OHS

Abstract

This study evaluates Occupational Safety and Health (OHS) risks in the enamelling process of a 150-litre solar water heater tank within a renewable energy manufacturing company, using the Hazard Identification, Risk Assessment and Risk Control (HIRARC) method. Conducted through qualitative observations, interviews, and document analysis, the research identified 15 potential hazards—13 high-risk, 1 extreme, and 1 low. Major risks stem from improper use of personal protective equipment (PPE), chemical exposure, and mechanical hazards. Recommended controls include proper PPE usage, engineering improvements, safety training, and better procedures. The findings confirm that HIRARC is effective for systematically identifying and managing workplace risks, fostering a proactive safety culture. The study emphasizes the need for continuous OHS improvement and integration of risk management into daily operations, supporting safer, more sustainable growth in the renewable energy sector.

References

Nugraha, E. M., & Yuliasari, D. (2020). Penerapan Metode HIRARC dalam Identifikasi Bahaya dan Penilaian Risiko di Industri Manufaktur. Jurnal Kesehatan Dan Keselamatan Kerja, 12(2), 89–95.

Pratiwi, R. A., Hidayat, T., & Lestari, N. (2021). Analisis Risiko K3 Menggunakan Metode HIRARC pada Proses Produks. Jurnal Teknik Industri, 15(1), 30–37.

Ramdan, D., Siregar, A., & Fahmi, M. (2022). Dampak Beban Kerja dan Keselamatan Kerja terhadap Risiko Kecelakaan di Industri Berat. Indonesian Journal of Occupational Safety, 10(3), 101–109.

Rizki, M. H., & Tjahjono, B. (2018). Penerapan HIRARC dalam Menilai Risiko pada Industri Manufaktur Skala Menengah. Jurnal Teknik Industri, 14(1), 45–52.

Saputra, R. A., Cahyadi, T., & Listiani, D. (2016). Evaluasi Risiko Kecelakaan Kerja pada Proses Produksi Menggunakan Metode HIRARC. Jurnal K3, 5(2), 85–92.

Sari, T. P., & Wibowo, R. (2023). Identifikasi Bahaya dan Penilaian Risiko Proses Kimia di Industri Energi Terbarukan. Jurnal Energi Dan Lingkungan, 8(1), 55–62.

Susanti, Y., Rahmadani, A., & Gunawan, T. (2023). Penerapan HIRARC untuk Pengendalian Risiko Bahaya dalam Proses Produksi Logam. Jurnal Keselamatan Kerja Terapan, 11(2), 120–129.

Utami, D. A., Hidayat, M., & Rachmawati, N. (2020). Analisis Bahaya Kerja dan Penilaian Risiko pada Industri Energi Berbasis Panel Surya. Jurnal Keselamatan Dan Kesehatan Kerja, 9(3), 112–120.

Wibowo, A., & Dewi, S. (2017). Pengaruh Kepatuhan Penggunaan APD terhadap Tingkat Kecelakaan Kerja di Industri Kimia. Indonesian Journal of Occupational Safety, 6(2), 76–83.

Yuliasari, D., & Nugroho, E. M. (2019). Strategi Pengendalian Risiko pada Proses Produksi Logam Menggunakan Pendekatan HIRARC. Jurnal Teknik Dan Keselamatan Kerja, 10(1), 30–38.

Downloads

Published

2025-05-29

How to Cite

Liwun, S. B. B., & Reyhan Hidayat. (2025). Mitigating Occupational Hazards in Renewable Energy Manufacturing: A HIRARC Assessment of Enamelling Operations. Jurnal Ilmiah Teknik, 4(2), 98–106. https://doi.org/10.56127/juit.v4i2.2029

Issue

Vol. 4 No. 2 (2025): Mei: Jurnal Ilmiah Teknik

Section

Articles

Citation Check